Adhesive Bonding

Rapid-setting liquid plugging additive designed for the immediate sealing and arresting of active water leakage. Blended with cement at a 1:3 ratio, it sets in 30–60 seconds to immediately stop pressurized water ingress in basements, lift wells, tunnels, and tanks.

Polymer bonding emulsion formulated to create high-shear mechanical and chemical adhesion between new concrete overlays and existing hardened masonry substrates.

Liquid membrane-forming curing compound with light-reflective pigments that minimizes surface water evaporation (>90% efficiency) and prevents thermal cracking.

Specialized waterproofing additive designed for structural concrete and plastering mortars to block capillary pores and resist rising damp and driving rain.

Resin-based sprayable curing compound designed for large horizontal surfaces like highways and runways, eliminating wet hessian or continuous water ponding.

Mineral-oil-based chemical shutter release agent that reacts with free lime to ensure stain-free, fair-faced concrete striking and extended formwork lifespan.

Single-component pure acrylic copolymer designed to enhance flexural strength, tensile adhesion, and abrasion resistance in screeds and patch repairs.

Rubberized bitumen emulsion forming a seamless elastomeric damp-proof membrane on foundation walls, retaining structures, and wet areas.

Polyvinyl acetate (PVA) bonding adhesive and sealer for plastering, rendering, tile bedding, and dust-proofing porous cementitious substrates.

High-solids SBR latex bonding agent and mortar modifier providing exceptional water resistance, chemical resistance, and heavy-duty structural bond strength.

High-performance elastomeric polysulphide joint sealant capable of accommodating cyclic movement up to ±30%, resistant to fuel, UV radiation, and atmospheric aging.

Tough, resilient polyurethane movement joint sealant delivering superior abrasion resistance, high tear strength, and watertight sealing for heavy traffic slabs.

Two-component high-strength epoxy putty and adhesive system formulated with a 1:1 mixing ratio for structural crack repair, concrete reinstatement, void filling, anchor embedment, and metal bonding under cold, damp, and elevated temperature conditions.

High-performance two-component epoxy anchoring system in a pre-measured 1:1 mixing ratio, formulated as a high-strength non-shrink structural adhesive for secure installation of anchor bolts, rebar dowels, and structural fixings.

Two-component epoxy resin-based adhesive, bedding, and repair mortar with smooth putty consistency for localized concrete repair, surface reprofiling, gap filling, and bridge bearing bedding.

Two-component flowable epoxy adhesive with a 1:1 mixing ratio engineered for concrete reinstatement, structural gap filling, machine embedment, and metal bonding under demanding thermal conditions.

Non-sag two-component thixotropic epoxy adhesive and repair compound with fine mineral aggregates for patching, concrete defect rectification, crack filling, and high-strength substrate bonding.

Two-component solvent-free epoxy injection resin with ultra-low viscosity for gravity-fed or pressure injection into structural concrete cracks (0.1 mm to 10 mm), delivering rapid high-strength structural repair.

High-performance multi-functional epoxy structural adhesive and repair compound with a 1:1 mixing ratio for precision bonding, structural rehabilitation, load-bearing anchorage, and high temperature service.